Constructed of reinforced composite, the stock system includes a 6 position T6 Stock Assembly that has been pinned so it will not collapse, SAW style Pistol Grip, and all necessary mounting hardware. The stock is pinned in the fully extended position.
Color: Tan
Installation: Simply removes the standard buttstock assembly and bolt this kit in place.
Warranty: Parts are made by TAPCO, but re-manufactured by gunsmith to prevent the stock from collapsing Because the stock has permanently modified, the TAPCO lifetime factory warranty is void.
Fits on your Saiga 12 ga, 20 ga, or 410 shotgun as well as all 7.62x39, 5.45x39, 308, or 223 Saiga Rifles without any modifications to the receiver to make it fit. Will not fit Saiga 100. You must drill screw holes. Screws and pilot bit are included.
The Saiga Rifles and Shotguns are imported in a sporting configuration and must be modified to comply with 922r if a pistol grip is installed. The Saiga rifles and shotguns have (14) fourteen component parts out of the box. In order to be compliant, there can be no more than (10) ten foreign parts on the firearm. If you are using a US made stock with pistol grip and have not installed any additional foreign parts, you will have to change out (3) three more foreign parts to keep the gun compliant.
We sell the following compliance parts:
1. US Made Magazines - 3 compliance parts (Magazine body, follower, and floorplate each count as one)
2. US Made Gas Piston - 1 Compliance Part
3. US Made Triggers
4. US Made Hammer
5. US Made Disconnector
6. US Made Muzzle Attachments
7. US Made Handguards/Forearms
For further information about 922, please visit the ATF's website.
This product was added to our catalog on Wednesday 01 September, 2010.
